Abrasives

Cast Steel Shots

Cast steel shot is used for a variety of tasks, including preparing the surfaces of stainless steel and nonferrous components and peening significant auto and aviation parts. We provide a cost-effective option that efficiently removes burrs, polishes the surface of aluminum die castings, and removes ceramic waste from investment castings. Our steel shots are commonly used for blasting to clean the inside and outside of steel molds, aluminum castings, and forged objects. At foundries for stainless steel and aluminum, these items are highly valued.

Chilled Iron Shots

Chilled iron shots are used for cleaning in foundries, in castings for sand removal, for air blast applications, for removing of old paints, cleaning of castings, metallurgical materials, blasting for rolled steel before and after heat treatment, blasting of stone, and for cutting of stone. Furthermore, these are also suitable for etching structural steel and components prior to coating with paint, metal spray & plastics. It is also used in surface preparation for electroplating, enameling, painting.

Stainless Steel Shots

Stainless steel shot is produced by melting stainless steel scrap of different grades. The product is mainly used for surface treatment of copper workpieces, aluminum workpieces, zinc workpieces, stainless steel workpieces, and so on. It is also used in removing sand and cleaning foundry castings, De-scaling metal sheets, billets, and profiles in the steel industries.

Copper Shots

It is used for removing oxidation skin, burr, eliminating the surface defect, removing stress, etching, unknit, strengthen, prevention of rust-formation before painting of metal die-casting, precision casting, hardware tool, machinery manufacturing, automobile spare parts, apparatus, pump valve industry.

Aluminum oxide grit

Aluminum oxide grit works quicker and may be used for both moist and dry blasting. It is safe to use on non-ferrous and ferrous equipment with no rust pollution in the treated areas. This product is widely utilized in the aerospace and other industrial sectors.

Copper slag grit

The Copper slag abrasive is a fitting choice for cleaning steel, stone, and concrete surfaces, and can efficiently eliminate mill scale, rust, old paint, dirt, and other unwanted substances. It is made by refining the granulated slag from copper refineries and can be utilized for blast-cleaning metal surfaces. The most comprehensive solution for prepping the metal surface before painting is to blast grit onto it.

Glass Bead

Blasting with glass beads results in a smooth and lustrous finish, without altering the dimensions of the parts. This technique can be used for both dry and wet blasting and is effective for delicately cleaning, descaling, deflashing, deburring, or shot peening on stainless steel and alloy steel parts where the amount of material removed must be kept to a minimum. It is commonly used for the general cleaning of machinery, dies, plates, molds, and for removing coatings and debris from surfaces. Large turbines and engine components, as well as little complicated pieces, are cleaned using glass bead blasting.

Silicon carbide grit

Silicon carbide grit is the ideal media for use on glass and stone in both suction and direct pressure blast systems. The ability to be recycled multiple times results in a cost-effective silicon carbide grit blast media with optimal etching results. It can be used efficiently for glass engraving and stone etching.